Advertisement
SN200/210 Bored Lock
11 Wire Connections
Do not offset connectors and ensure that they are completely seated.
1. Connect 6-pin connector from lock body to 6-pin connector on reader harness (Fig. 11A).
2. Connect 2-pin connector from lock body to 2-pin connector on reader harness (Fig. 11A).
Fig. 11A
3. Carefully tuck connected harnesses into one-inch hole in door (Fig. 11C).
4. Connect ElectroLynx 4- and 8-pin connectors from the door harness to (black) 4- and 8-pin
connectors of the SN200/210 harness (Fig. 11B).
NOTE: Neatly fold excess wires into remaining space to prevent pinching
wires when mounting inside escutcheon (Fig. 11C).
8-pin
ElectroLynx
SN200/210
Harness
Fig. 11B
4-pin
ElectroLynx
Fig. 11C
A8282B • 800-810-WIRE (9473) • www.sargentlock.com
17
Advertisement
