Assa Abloy SARGENT SN Sereis Installation Instructions Manual page 13

SN200/210 Bored Lock
5 Install Reader Backplate and (Optional*) Fire Shield
1. For fire-rated doors only, install reader backplate and fire shield to door using two (2) #8-18
x 5/8" Phillips flat head self-drilling screws (Fig. 5).
2. For exterior doors, install reader backplate using two (2) #8-18 x 5/8" Phillips flat head self-
drilling screws (Fig. 5).
3. *For non-fire rated interior doors, no fire shield or gasket is required; simply install backplate
using two (2) #8-18 x 5/8" Phillips flat head self-drilling screws.
Outside of
Door
Reader
Backplate
(2) #8 x 5/8" Phillips flat head
self-drilling screws
A8282B • 800-810-WIRE (9473) • www.sargentlock.com
Fig. 5
Fire Shield
(for fire-rated doors)
(2) #8 x 5/8" Phillips flat head
self-drilling screws
Detail
13