Technical Data; Application; Function And System Design - Endress+Hauser Proline Prosonic Flow P 500 Operating Instructions Manual

Proline Prosonic Flow P 500 HART
Measuring principle
Measuring system
Endress+Hauser
16

Technical data

16.1

Application

The measuring device is intended only for the flow measurement of liquids.
To ensure that the device remains in proper operating condition for its service life, use the
measuring device only for media against which the process-wetted materials are
sufficiently resistant.
16.2

Function and system design

Proline Prosonic Flow uses a measurement method based on the transit time difference.
The measuring system consists of a transmitter and two or one sensor sets. The
transmitter and sensor sets are mounted in physically separate locations. They are
interconnected by sensor cables.
The measuring system uses a measurement method based on the transit time difference.
Here, the sensors function as sound generators and sound receivers. Depending on the
application and version, the sensors can be arranged for a measurement via 1, 2, 3 or 4
traverses →  22.
The transmitter serves to control the sensor sets, to prepare, process and evaluate the
measuring signals, and to convert the signals to the desired output variable.
Information on the structure of the device →  13
Technical data
193