Safety Instructions; Requirements For The Personnel; Intended Use - Endress+Hauser Proline Prosonic Flow P 500 Operating Instructions Manual

Proline Prosonic Flow P 500 HART
Endress+Hauser
2

Safety Instructions

2.1

Requirements for the personnel

The personnel for installation, commissioning, diagnostics and maintenance must fulfill
the following requirements:
‣
Trained, qualified specialists must have a relevant qualification for this specific function
and task.
‣
Are authorized by the plant owner/operator.
‣
Are familiar with federal/national regulations.
‣
Before starting work, read and understand the instructions in the manual and
supplementary documentation as well as the certificates (depending on the
application).
‣
Follow instructions and comply with basic conditions.
The operating personnel must fulfill the following requirements:
‣
Are instructed and authorized according to the requirements of the task by the facility' s
owner-operator.
‣
Follow the instructions in this manual.
2.2

Intended use

Application and media
The measuring device described in this manual is intended only for the flow measurement
of liquids.
Depending on the version ordered, the measuring device can also measure potentially
explosive, flammable, poisonous and oxidizing media.
Measuring devices for use in explosive atmospheres, in hygienic applications or where
there is a high risk of pressures, are labeled accordingly on the nameplate.
To ensure that the measuring device is in proper condition during the operation period:
‣
Only use the measuring device in full compliance with the data on the nameplate and
the general conditions listed in the Operating Instructions and supplementary
documentation.
‣
Refer to the nameplate to check whether the ordered metering system can be operated
for the intended application in areas requiring specific approvals (e.g. explosion
protection, pressure equipment safety).
‣
Use the measuring device only for media to which the process-wetted materials are
sufficiently resistant.
‣
Keep within the specified pressure and temperature range.
‣
Keep within the specified ambient temperature range.
‣
Protect the measuring device permanently against corrosion from environmental
influences.
Incorrect use
Non-designated use can compromise safety. The manufacturer is not liable for damage
caused by improper or non-designated use.
Residual risks
CAUTION
L
Risk of hot or cold burns! The use of media and electronics with high or low
temperatures can produce hot or cold surfaces on the device.
‣
Mount suitable touch protection.
‣
Use suitable protective equipment.
Safety Instructions
9