Technical Data; Input - Endress+Hauser Soliwave FDR56 Operating Instructions Manual

Technical data

52
13 Technical data
13�1

Input

13�1�1 Measured variable
Absorption of the radiated electromagnetic waves
13�1�2 Measuring range (Detection range)
Max. 100 m (depending on the process walls to be penetrated)
13�1�3 Operating frequency
24 GHz ISM
13�1�4 Transmitting power
• The radiated power is maximum 100 mW e.i.r.p. (equivalent isotrope radiation perfor-
mance).
• Power density directly in front of the device: Approx. 1 mW/cm
• Power density at a distance of 1 m: Approx. 0.3 µW/cm
13�1�5 Antenna opening angle (3 dB)
Approx. ± 11°
13�2 Output
13�2�1 Output signal
Relay
• Switching capacity 250 V AC / 4 A, 125 V DC / 0.4 A or 30 V DC / 4 A
• Switching delay parameterizable (off, 500 ms to 10 s)
• Switching hysteresis adjustable
• Switching frequency max. 4 Hz
Solid-state relay
• Switching capacity 30 V AC / 0.4 A or 40 V DC / 0.4 A
• Switching delay parameterizable (off, 500 ms to 10 s)
• Switching hysteresis adjustable
• Switching frequency max. 4 Hz
Current output
• Current 4-20 mA, active
• Load max. 600 Ω
13�2�2 Ex connection data
See safety instructions (XA): All data relating to explosion protection are provided
in separate Ex documentation and are available from the Downloads Area of the
Endress+Hauser-website. The Ex documentation is supplied as standard with all Ex de-
vices.
Soliwave FDR56/FQR56
2
2
Endress+Hauser