Querying The Battery Status - Huawei LUNA2000-5-S0 User Manual

LUNA2000-(5-30)-S0
User Manual
Parameter
End-of-charge SOC
(%)
End-of-discharge
SOC (%)
Charge from grid
Grid charge cutoff
SOC

7.3.3 Querying the Battery Status

Scenario 1: Single Inverter or Cascaded System Based on Smart Dongle
Networking
Log in to the FusionSolar app as installer, connect to the inverter, and tap Device
monitoring on the home screen to check the running status, battery level, power,
and charging and discharging status of the ESS. If an alarm is generated, see
''Troubleshooting''.
Issue 15 (2024-01-12)
NO TE
If no PV modules are installed or the system has not detected sunlight for at least 24 hours,
the minimum end of discharge SOC is 15%.
Copyright © Huawei Digital Power Technologies Co., Ltd.
Description
Set the charge cutoff capacity.
Set the discharge cutoff
capacity.
If Charge from grid function is
disabled by default, comply
with the grid charge
requirements stipulated in local
laws and regulations when this
function is enabled.
Set the grid charge cutoff SOC.
7 System Commissioning
Value Range
90%–100%
0%–20%
● Disable
● Enable
[20%, 100%]
7.3
111