Huawei LUNA2000-5-S0 User Manual page 103

LUNA2000-(5-30)-S0
User Manual
Connecting Cascading DC Input Power Cables (Cascading)
Connect the DC input terminals (BAT+ and BAT–) between the power control
module by referring to
Terminals
Figure 6-17 Inserting the terminal
Connecting a Signal Cable (Cascading)
Prepare a signal cable terminal for connecting the power control module.
Issue 15 (2024-01-12)
6.3.2 Installing DC Input Power
NO TE
● Identify the signal terminal pins according to the following figures, and connect cables
according to Table 6-3. When you insert the communications terminal of the power
control module, the silk screens on the two sides of the communications port are
different. Insert the communications terminal according to the following figures.
● The communications terminals on the cascading side need to be connected to RS485+
\RS485-, EN+\EN-, CANH\CANL, and PE.
Copyright © Huawei Digital Power Technologies Co., Ltd.
6 Electrical Connection
Cables.
94