Huawei LUNA2000-5-S0 User Manual page 143

LUNA2000-(5-30)-S0
User Manual
Figure 8-3 Cable connection diagram
Battery Power-On and Commissioning
● Ensure that the charge process is supervised to prevent any abnormality.
● If a battery experiences an abnormality such as bulging or smoking, stop
● Ensure that only trained professionals perform recharge operations.
● After turning on the battery switch, power on the inverter. For details about
● When the battery SOC is 0%, the battery cannot be activated by holding the
● It is recommended that the battery be charged to 50% SOC. Long-term storage
Step 1 Connect cables correctly.
Issue 15 (2024-01-12)
NO TICE
charging immediately and dispose of it.
how to power on the inverter, see the quick guide for the corresponding
inverter model.
black start button. The battery can be started only after both the DC and AC
power supplies are connected.
will cause capacity loss, after a lithium battery is stored for 12 months in the
recommended storage temperature, the irreversible capacity loss rate is 3%–
10%.
Copyright © Huawei Digital Power Technologies Co., Ltd.
8 System Maintenance
134