Power-On; Soc Changes; Checking Cable Connections When The Product Fails To Be Upgraded; Wifi Qr Code Scanning - Huawei iSitePower-M V100R002C00 User Manual

iSitePower-M V100R002C00 (MAP15A1, MAB05B1)
User Manual
Figure 9-1 Usage of the removal tool
(1) Power parallel port for
battery modules

9.6 Power-On

Do not touch the black start switch during the installation. Otherwise, electric
shocks may occur.

9.7 SOC Changes

How does a battery charge from 99% to 100%?
When the SOC is greater than 99%, the battery switches to float charging and the
charge current decreases gradually until the SOC reaches 100%.
9.8 Checking Cable Connections when the Product Fails
to Be Upgraded
If the product fails to be upgraded, check the cable connections. Ensure that the
cables are correctly connected and perform the upgrade again.

9.9 WiFi QR Code Scanning

Scan the QR code on the device to connect to the WiFi. If the connection fails,
contact your installer.
9.10 Querying the Battery Capacity in the Parallel
System Scenario
Query the total system capacity on the app.
9.11 Conflict Between the LAN IP Address of the
Router and the IP Address of the Product
If the IP address of the product conflicts with the LAN address of a home WiFi
router, the connection between the NMS and the mobile app may fail. Before
connecting the iSitePower-M to the NMS through a home WiFi router, check the
LAN IP address of the router. The IP address cannot be 192.168.0.X, 192.168.7.X, or
Issue 01 (2021-09-30)
(2) Battery cascading port
Copyright © Huawei Digital Power Technologies Co., Ltd.
(3) PV input port
9 FAQs
90