System Maintenance - Huawei LUNA2000-5-S0 User Manual

LUNA2000-(5-30)-S0
User Manual
● Wear personal protective equipment and use dedicated insulated tools to avoid
● Do not smoke or have an open flame around batteries.
● Do not use wet cloth to clean exposed copper bars or other conductive parts.
● Do not use water or any solvent to clean batteries.
● Do not maintain batteries with power on. To power off the batteries before
● After batteries are discharged, charge them in time to avoid damage due to
● Before moving or reconnecting the equipment, disconnect the mains and
● Do not connect two or more cables to the positive or negative power port of a
● Stay away from the equipment when preparing cables to prevent cable scraps
Issue 15 (2024-01-12)
D ANGER
electric shocks or short circuits.
WARNING
performing operations such as checking and tightening screw torques, explain
the risks to the customer, obtain the customer's written consent, and take
effective preventive measures.
overdischarge.
batteries and wait for five minutes until the equipment powers off. Before
maintaining the equipment, check that no hazardous voltages remain in the DC
bus or components to be maintained by using a multimeter.
CA UTION
battery in parallel.
from entering the equipment. Cable scraps may cause sparks and result in
personal injury and equipment damage.
Copyright © Huawei Digital Power Technologies Co., Ltd.
8

System Maintenance

8 System Maintenance
116