Huawei LUNA2000-5-S0 User Manual page 110

LUNA2000-(5-30)-S0
User Manual
Function
Add a battery and set the working mode on the quick settings screen of the
inverter.
Scenario 1: Quick Settings for Single Inverter or Cascaded System Based on
Smart Dongle Networking
Step 1 Log in to the FusionSolar app as installer, tap Setup Wizard, and scan the inverter
QR code (when the Smart Dongle is connected, scan the QR code of the inverter
connected to the Smart Dongle).
Figure 7-4 Setup Wizard
Step 2 Tap Quick settings to set parameters for commissioning as prompted. For details
about setting the battery working mode, see
Settings''.
Issue 15 (2024-01-12) Copyright © Huawei Digital Power Technologies Co., Ltd.
7 System Commissioning
3 ''Application Scenarios and
101