LUNA2000-(5-30)-S0
User Manual
Parameter
Working mode
Maximum charge
power (kW)
Maximum discharge
power (kW)
End-of-charge SOC (%)
Issue 15 (2024-01-12)
Figure 4-5 Battery control parameter setting
Description
Set this parameter to the maximum
self-consumption mode.
Retain this parameter to the maximum
charge power. Additional configuration
is not required.If only one battery
expansion module is configured, the
maximum charge power is 2.5 kW.
Retain this parameter to the maximum
discharge power. Additional
configuration is not required.If only one
battery expansion module is configured,
the maximum charge power is 2.5 kW.
Set the charge cutoff capacity.
Copyright © Huawei Digital Power Technologies Co., Ltd.
4 Application Scenarios and Settings
Value Range
● Maximum self-
consumption
● TOU (time-of-use)
● Fully fed to grid
[0, Maximum charge power]
[0, Maximum discharge
power]
90%–100%
43