External Electrical Connections Of The Battery - Huawei LUNA2000-5-S0 User Manual

Hide thumbs Also See for LUNA2000-5-S0:
Table of Contents

Advertisement

LUNA2000-(5-30)-S0
User Manual
Figure 6-5 Securing With Screws

6.3 External Electrical Connections of the Battery

Battery cable connections
Issue 15 (2024-01-12)
NO TE
● When a communications terminal is connected to a single network cable, a waterproof
rubber plug must be installed. Do not install a cable with a diameter of 5 mm into a Ф7
mm rubber plug.
● After inserting the terminal shell into the COM port, shake the terminal shell left and
right and pull it back to ensure that it is securely installed, and tighten the nut (ensure
that the rubber plug is tightly compressed). Otherwise, the waterproof performance is
affected.
NO TE
The DC-DC converter has a COM port on both sides. When batteries are connected in
parallel, you are advised to connect the inverter to the COM port on the right side and
connect the cascaded batteries to the COM port on the left side.
Copyright © Huawei Digital Power Technologies Co., Ltd.
6 Electrical Connection
84

Advertisement

Table of Contents
loading

This manual is also suitable for:

Luna2000-30-s0

Table of Contents