References - Os/2; References – Os/2 - Xerox DocuPrint 92C Installation Planning Manual

References – OS/2
Title
PSF/2 – A Guide to Using PSF/2
PSF/2 – Network Configuration Guide for System/370 and
Communications Manager/2
PSF/2 – Installation Cookbook for System/370
PSF/2 – Installation Cookbook for AS/400
PSF/2 – "What's New?"
TCP/IP for OS/2 – Installation and Maintenance
XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE
Table E-28.Components to check for printer performance
Printer Ensure that the Maximum Transmission Unit size (MTU) is as
large as possible. A small MTU size increases the number of
packets that are transmitted, allowing greater chances of
degradation throughout the network. Increasing the MTU size in
both TCP/IP for OS/2 and the IPS printer may improve printer
performance.
LAN If the printer is on a LAN that also has a large number of other
devices attached to it, the high levels of traffic on the LAN can
cause printer speed degradation. Consider moving the printer to
a LAN that does not have so much activity on it.
LAN-to-host If the speed of the link connecting the LAN with the printer
attachment attached to the OS/2 system is slow, this could be a bottleneck.
Review your network configuration diagrams to look for any
potential bottlenecks.
The following IBM documents, referenced in this section, can provide
additional information on OS/2-to-IPDS printer connectivity.
Table E-29.Reference documents – OS/2
DEFINING THE PRINTER TO THE HOST: TCP/IP ATTACHMENT
problems – OS/2 (continued)
IBM order number
G544-5225
S544-3911
G544-3965
G544-3966
Online reference
included with PSF/2
program materials
SC31-6075
E-35