Xerox DocuPrint 92C Installation Planning Manual page 170

INDEX
Xerox, 4-1–4-2, 8-2
RISC-based controller, 1-1
S
S/370 bus, 2-10
saddle-stitching, 3-8
safety
hotline, iv
precautions, iii
standards, iii
sample printer definitions
MVS with channel attachment, D-1–D-3
MVS with TCP/IP connection, E-1–E-17
OS/2 with channel attachment, D-4–D-5
VM with channel attachment, D-6
VSE with channel attachment, D-6
SCSI cartridge tape drive, 2-3, 2-6
selecting
labels, A-2
paper, characteristics, A-2
transparencies, A-2
service
telephone number, B-1
Xerox responsibilities, 4-2
shared space, 6-11–6-14
site
personnel, customer responsibility, 4-2
preparation, customer responsibility, 4-2
selection, Xerox responsibilities, 4-1
Sixth Sense, 1-5, B-2
software licenses, 8-3
software prerequisites
AIX, E-25
AS/400, E-18
MVS, E-1
OS/2, E-28
space
planning guidelines, 6-11
requirements, 5-3, 6-11–6-14
specifications
see also requirements
electrical, 5-1–5-2, 5-8, 6-1–6-3, 6-18
printer, 6-18
printer controller, 5-8–5-9
stacking, 3-8
stand-alone devices, 3-8
stapling, 3-8
stitcher wire, ordering, A-7
stitcher/stacker, 1-4, 3-6, 6-7–6-9, 6-18
Sun workstations, 1-1, 2-1–2-4, 2-4–2-8, 5-4, 5-5
supplies
checklist, A-16
consumable supplies tables, A-9–A-13
developer, A-6
diskettes, A-7
dry ink
INDEX-4
color, 6-10
toner, A-6
fuser
agent, A-6
shield, A-6
paper, A-1–A-3
stitcher wire, A-7
tapes, A-7
supplies table, A-9–A-13
support services, A-14, B-1–B-4
T
tape
ordering, A-7
tape drive, 2-3, 2-6, 5-8
TCP/IP
defining, E-1–E-35
Ethernet interface, 1-2
MVS
configuring, E-11
Profile dataset, E-12–E-13
telephone numbers
service, B-1
Xerox Parts and Product Support Center, A-14
Xerox Product Safety, iv
Xerox Supply Center, A-14
third party finishing devices, 3-8–3-10
three-phase DELTA, 6-3
tinted paper, A-2
Token Ring, 1-2, 2-1, 2-4, 4-7
toner, see dry ink
training, 8-1, B-3
customer responsibility, 4-3
Xerox responsibilities, 4-2
transmission rate, 1-2
transparencies, selecting, A-2
trays
capacities
dual stacker, 1-4, 3-5
HCF, 3-4
stitcher/stacker, 1-4, 3-6
feeder, 1-3
input, 1-3
locations, 3-2
trimming, 3-8
turning radius, 6-15–6-17
U
UltraSPARC workstation, see Sun workstations
United States/Canada, 5-2
V
vertical clearance, 6-5
VM, D-6
XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE