Os/2 Procedures - Xerox DocuPrint 92C Installation Planning Manual

DEFINING THE CHANNEL-ATTACHED PRINTER TO THE HOST

OS/2 procedures

D-4
This section gives examples of printer device parameters and
definitions for a channel-attached in the OS/2 environment using
PSF/2.
To print using PSF/2, you must identify the IPS to the PSF/2 print
server by setting up a device for the IPS.
1. From the Profile pulldown menu, select New. The New Device
window displays.
Figure D-2. OS/2 New Device window
New device
Enter the following information to create a new device:
Device name:
Path:
Description:
Attachment Type
Channel
Communication
Parallel
TCP/IP
Device Resolution:
Create
2. In the New Device window, enter the name of the new device
(for example, 4890 IPS) in the "Device name" field.
3. In the "Path" field on the New Device window, use the default
path or enter a path to indicate where the device settings and
other associated files are located.
4. In the "Description" field on the New Device window, enter a
description of the new device, as necessary.
5. From the Attachment Type list box on the New Device window,
select Channel.
6. Click [Settings] on the New Device window. The Channel
Attachment Settings window displays.
7. From the Channel Slot pulldown menu on the Channel
Attachment Settings window, select or enter the channel
address.
8. In the "Control Unit Address" field on the Channel Attachment
Settings window, enter the two-digit address for the control unit.
XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE
4635 IPS
C:\PSF2\SYSTEM\
Settings...
300 PEL
Cancel Help