Ccu Changeout Cart - Xerox DocuPrint 92C Installation Planning Manual

PRINTER SPECIFICATIONS AND REQUIREMENTS

CCU changeout cart

6-10
The changeout cart is required for installing and removing the CCU,
which contains the colored dry ink. A cart must also be used to store
any CCUs that are not currently installed in the printer. Therefore, if
you intend to print using more than one dry ink color, you should have
one cart for each CCU.
Note: If there is more than one laser printer at your site, it may not
be necessary to have one cart per CCU. Consult with your site
representative for more information.
Empty carts may be stored anywhere in your site that is convenient
and provides easy access when the carts are required for a
changeout. Carts with a CCU loaded (a CCU being stored on the
cart) should be stored in a controlled environment, preferably in the
same controlled environment as the printer. This reduces the amount
of time required for the printer to set up the color developer housing
(inside the CCU) once it is installed and therefore reduces the
amount of total time required for a change of dry ink color.
You should plan for the space necessary to store the carts: the space
in the controlled environment for loaded carts and other space for
empty carts.
The dimensions of the cart are as follows:
Dimension Specifications
Width: 16.1 inches / 40.9 cm
Depth: 29.1 inches / 73.9 cm
Height: 36.9 inches / 93.7 cm
Weight: 130 pounds / 59 kg (with CCU loaded).
Note: Additional space (6-inch by 64-inch / 15 cm by 163 cm) is
required in front of the printer for CCU changeout cart
operability.
XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE