Xerox DocuPrint 92C Installation Planning Manual page 126

DEFINING THE PRINTER TO THE HOST: TCP/IP ATTACHMENT
Item description
DATABUFFERPOOLSIZE
Data buffers
DATABUFFERPOOLSIZE
Buffer size
SMALLDATABUFFERPOOLSI
ZE
TINYDATABUFFERPOOLSIZE 0
KEEPALIVEOPTIONS
GATEWAY max_packet_size
Considerations for configuring TCP/IP
E-12
Table E-7.TCP/IP Profile dataset parameters – MVS
Source of Range of
Default value acceptable values Comments
160 Installation 7 to nnnn, where
preferences nnnn is limited by
available virtual
storage
16384 Installation 8192
preferences
12288
16384
24576 131072
28672 196608
32768 262144
0 Installation 0 to nnnn, where
preferences nnnn is limited by
available virtual
storage
Installation 0 to nnnn, where
preferences nnnn is limited by
available virtual
storage
Interval Installation
120 preferences
sendgarb
age false
Defaultsi Installation Can be from 576 to
ze is 576 preferences 67108864, but
cannot be larger
than value specified
on LARGEENVE
LOPEPOOLSIZE
statement.
Following are some considerations for configuring TCP/IP for MVS:
for MVS
•
To specify a TCP/IP address space name other than the
default, TCPIP, code the following EXEC statement in the
appropriate PSF writer procedure:
STEP01 EXEC PGM=APSPPIEP,
PARM=(,,,,tcpip_name), REGION=4096K
where tcp/ip_name is the name of the TCP/IP address space.
If this parameter is not coded, PSF uses the default name,
TCPIP. (For a full description of the PARM parameter, refer to
Print Services Facility/MVS: Diagnosis Guide and Reference.)
Specify at least 160
buffers.
49152 Specify a buffer
size of at least
65536
32768, if possible.
98304
Specify at least 256
small data buffers.
Specify at least 256
tiny data buffers.
See Notes.
Max packet size
parameter should
be no greater than
4472 bytes in a 4
Mbps LAN
configuration, and
17800 in a 16 Mbps
LAN configuration.
Default MTU value
in IPS printer is
2052.
XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE
Your value