Xerox DocuPrint 92C Installation Planning Manual page 39

XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE
— Review this IPS Installation Planning Guide thoroughly
— Have the required parameters defined for configuring PSF
to print on the IPS. Refer to the "Defining the channel
attached printer to the host" or the "Defining the printer to
the host: TCP/IP attachment" appendix of this guide for
examples and explanations of these parameters.
•
Training
— Select the personnel to undergo operator training
— Set up the operator training schedules.
•
Applications
— Work with your Xerox system analyst to determine
requirements for the initial applications
— In a mixed environment, where there is a variety of printing
systems, discuss print quality differences with your service
representative.
Make sure that your system specialists are familiar with the operating
system software specific to your IPS; operating system software is
not the same for all laser printing systems. If your system specialists
are familiar with one of these operating systems and you are
converting to or adding another, they should be aware of the
differences.
PREPARING FOR INSTALLATION
4-3