Set the Vertical System through touchscreen
Touch to select the channel
Selected Unselected
Select a channel (CH1 - CH4 buttons): Touch the pointer on the left side of
corresponding channel to make it in selected state.
Set the vertical position of the selected channel (VERTICAL POSITION knob):
Swipe up or down on the left half of the screen.
Set the trigger level of the source in trigger menu (TRIG LEVEL knob): Swipe up
or down on the right half of the screen.
Set the voltage division of the selected channel (vertical VOLTS/DIV knob): Click on
the upper left area to decrease the voltage division; click on the lower left area to
increase the voltage division.
4.Junior User Guidebook
Control the vertical position
of the selected channel
Click to decrease
the voltage division
of the selected channel
Click to increase
the voltage division
of the selected channel
18
Control the trigger level of
the source in trigger menu