Using The Bypass Tray; Loading The Bypass Tray - Xerox WorkCentre 4260S User Manual

Using the Bypass Tray

Loading the Bypass Tray

Remove any curl on
postcards and labels
before loading them into
the Bypass Tray.
Xerox WorkCentre 4260 User Guide
the settings. If the settings are correct, select the Confirm button. Please refer
to Setting the Paper Size in the Paper and other Media chapter on page 163..
The bypass tray is located on the right side of your machine. It can be closed when
not in use, making the product more compact. Use the bypass tray to print
transparencies, labels, envelopes or postcards in addition to making quick runs of
paper types or sizes that are not currently loaded in the paper tray. Acceptable
print media is plain paper from 3.9" x 5.8" to 8.5" x 14" (98 mm x 148 mm to 216
mm x 356 mm) and weighing between 16 lb and 43 lb (60 g/m² and 163 g/m²).
1.
Lower the bypass tray, located on the right side of the product and unfold the
paper support extension.
2.
Prepare a stack of paper for loading by flexing or fanning them back and
forth. Straighten the edges on a level surface.
3.
Load the print material with the
print side facing down and against
the right edge of the tray.
NOTE: Hold transparencies by the
edges and avoid touching the print
side.
10 Paper and other Media
Bypass Tray
159