Loading Paper - Xerox WorkCentre 4260S User Manual

Loading Paper

Preparing Paper for Loading
Loading the Paper Trays
Xerox WorkCentre 4260 User Guide
Before loading paper into the paper trays, fan the edges. This procedure separates
any sheets of paper that are stuck together and reduces the possibility of paper
jams.
NOTE: To avoid unnecessary paper jams and misfeeds do not remove paper from
its packaging until required.
Using the instructions provided below, load paper into the machine. Up to three
paper trays are available, depending on your machine configuration.
1.
To load paper, carefully pull out the paper tray.
Rear Paper
Guide
NOTE: Take care not to let the tray fall when removing it from the device.
2.
Adjust the rear paper guide to the required paper
length. It is preset to A4 or Letter size depending on
country. To load another size, squeeze the rear
guide and move from the current position and into
the required position.
10 Paper and other Media
Side Paper
Guide
157