Stop The Fax Job - Xerox WorkCentre 4260S User Manual

6 Job Status Screen

7 Stop the Fax Job

LAN Fax Procedure
Xerox WorkCentre 4260 User Guide
To follow the progress of your fax job,
press the Job Status button on the
control panel to display the Job
Status screen.
The default Job Status screen
displays all incomplete jobs, including
the queued fax job. If there are no
incomplete jobs in progress, the
message "No Active Jobs" is
displayed. For more information on
the Job Status screen, refer to Job
Status Screen in the Copy chapter on
page 41.
Follow the steps below to manually cancel an activated fax job.
1.
Press the Stop button on the control panel to cancel the current fax job.
2.
To cancel a queued job press the Job Status button on the control panel to
display the Active Jobs screen.
3.
Select the appropriate job from the queue to view the Progress of your Job
screen.
4.
Select Delete from the Job Commands list.
5.
Select Confirm to delete the job or Cancel to return to previous screen.
This section describes the basic procedure for sending a LAN fax.
NOTE: If an authentication feature is enabled, you may need an account before
using the device. To get an account, or for more information, contact the System
Administrator.
Documents can be faxed from your PC using the print drivers supplied. The print
driver must be loaded on each PC which uses the machine for faxing.
4 Fax
67