Safety - Xerox WorkCentre 4260S User Manual

1 Welcome

Safety

6
Read these safety notes carefully before using this product to ensure you operate
the equipment safely.
Your Xerox product and supplies have been designed and tested to meet strict
safety requirements. These include Safety Agency approval, and compliance to
established environmental standards. Please read the following instructions
carefully before operating the product and refer to them as needed to ensure the
continued safe operation of your product.
The safety testing and performance of this product have been verified using
XEROX materials only.
Follow all warnings and instructions marked on, or supplied with the product.
This WARNING mark alerts users to the possibility of personal injury.
This WARNING mark alerts users to heated surfaces.
WARNING: This symbol indicates a Laser is being used in the equipment and
alerts the user to refer to the appropriate safety information.
WARNING: This product must be connected to a protective earthing circuit.
Operator Accessible Areas
This equipment has been designed to provide operator access to safe areas only.
Operator access to hazardous areas is restricted using covers or guards, which
require a tool to enable removal. Never remove these covers or guards.
Maintenance Information
1.
Any operator product maintenance procedures will be described in the user
documentation supplied with the product.
2.
Do not carry out any maintenance on this product which is not described in
the customer documentation
WARNING: Do not use aerosol cleaners. Aerosol cleaners can be explosive or
flammable when used on electromechanical equipment.
3.
Use supplies and cleaning materials only as directed in the Operator section
of this manual.
Xerox WorkCentre 4260 User Guide