Xerox WorkCentre 4250C User Manual page 225

Errors & Faults
Toner Supplying Error
Invalid Toner Cartridge
Full Stack
Output
Staple Cartridge Not
Installed
Stapler Fault
DADF Jam
DADF
Load Document
Xerox WorkCentre 4250/4260 User Guide
Description
Toner is not being supplied
correctly.
The installed Toner Cartridge is
not a valid Xerox cartridge.
Output tray full.
Staple cartridge not installed.
Stapler unit does not work.
The loaded document has
jammed in the DADF.
You have attempted to set up a
job with document not loaded
or incorrectly loaded in the
DADF.
14 Troubleshooting
Solution
Check the Toner Cartridge is installed
securely.
Check the Toner Cartridge and install
a valid Xerox cartridge if necessary.
If problem persists, call for service.
Remove printed material from
Output tray.
Install staple cartridge.
Open stapler door and check the
stapler. Close stapler door.
If the fault persists, Power Off / Power
On.
If the problem persists, call for
service.
Open DADF cover and remove
jammed media.
Load document in DADF.
If already loaded, remove and reload.
217