Audio Tones - Xerox WorkCentre 4250C User Manual

11 Setups
Language Default

Audio Tones

180
Use this feature to set the User Interface language.
Tools > Device Settings > General >Language > Default and Priority
Use this feature to enable or disable one of the following audio tones:
Tone
Fault Tone
Conflict Tone
Selection Tone
When enabled, the tones can be set to either low, medium or high. Select the Test
button to test the tone volume. Select Save to confirm the settings.
Tools > User Interface > General > Audio Tones
Description
Sounds when there is a fault on the machine.
Sounds when there is a system setting conflict.
Sounds when a button is selected.
Xerox WorkCentre 4250/4260 User Guide