Xerox WorkCentre 4250C User Manual page 148

8 Print Files
1 Print the Job(s)
2 Job Status Screen
3 Stop the Job
140
Press the Start button.
NOTE: Do not remove the USB drive from the device until printing has completed.
To follow the progress of your
scanning job, press the Job Status
button on the control panel to display
the Job Status screen.
The default Job Status screen displays
all incomplete jobs. If there are no
incomplete jobs in progress, the
message "No Active Jobs" is displayed.
For more information on the Job
Status screen, refer to Job Status
Screen in the Copy chapter on
page 41.
Follow the steps below to manually cancel an activated job.
1.
Press the Stop button on the control panel to cancel the current copy job.
2.
To cancel a queued job press the Job Status button on the control panel to
display the Active Jobs screen.
3.
Select the appropriate job from the queue to view the Progress of your Job
screen.
Xerox WorkCentre 4250/4260 User Guide