Changing Menu Settings - Xerox Phaser 6180MFP User Manual

Changing Menu Settings

Changing the Power Saver Time
In this example, you set the transitional time to the Power Saver Mode. For more information
on the power saver modes, see
1. To display the
Setup
2. Press the Up Arrow or Down Arrow button until
the Forward Arrow or OK button.
3. Press the Up Arrow or Down Arrow button until
press the Forward Arrow or OK button.
4. Press the Up Arrow or Down Arrow button until
press the Forward Arrow or OK button.
5. Select
Mode 1 (Printer)
6.
Press the Up Arrow or Down Arrow button to change the number of minutes that the
printer will wait before entering the Power Saver mode.
7. Press the OK button to confirm your settings.
Note: If you want to change values after you have confirmed them by pressing the OK button,
you need to set them from the start again.
Power Saver Modes
screen, press the System button on the control panel.
or , and then press the OK button.
Mode 2 (System)
Phaser® 6180MFP Multifunction Printer
9-3
Control Panel Menus
on page 2-10.
appears, and then press
Admin Menu
appears, and then
System Settings
appears, and then
Power Saver Timer