Dynamic Methods Of Setting The Printer's Ip Address - Xerox Phaser 6180MFP User Manual

Dynamic Methods of Setting the Printer's IP Address

There are two protocols available for dynamically setting the printer's IP address:
DHCP (enabled by default on all Phaser printers)
■
■ AutoIP
You can turn on/off both protocols using the control panel, or use CentreWare IS to turn on/off
DHCP.
Note: You can print a report that includes the printer's IP address. On the control panel, press
the System button, select
then press the OK button. The IP address is listed on the Configuration report.
Using the Control Panel
To turn on/off either the DHCP or AutoIP protocol:
1. On the control panel, press the System button.
2.
Select the Admin menu, and then press the OK button.
3. Select the
Network Settings
4.
Select the TCP/IP menu, and then press the OK button.
5. Select
Get IP Address
Using CentreWare IS
To turn on/off the DHCP protocol:
1. Launch your web browser.
2.
Enter the printer's IP address in the browser's Address field.
3. Select Properties.
4. Select the Protocols folder on the left navigation panel.
5.
Select TCP/IP.
6. In the Get IP Address field, select the DHCP/Autonet option.
7.
Click the Save Changes button.
, press the OK button, select
Information Pages
menu, and then press the OK button.
, and then press the OK button.
Phaser® 6180MFP Multifunction Printer
4-7
Configuring the Network Address
Configuration
, and