Xerox Phaser 6180MFP User Manual page 219

Multifunction printer
Hide thumbs Also See for Phaser 6180MFP:
Table of Contents

Advertisement

Message
Limit Reached
Press Set
MCU Firmware Error
024-340
Restart Printer
MCU NVRAM Error
041-340
Address: xxxx Data: xx
Restart Printer
Open Front Cover
& Belt Unit
Remove Paper
Open Front Cover
Remove Paper
Open Front Cover
Remove Paper &
Check Paper Type
Open Tray 2
Remove Paper
Open & Close
Door A
Open Tray 3
Remove Paper
Open & Close
Door A
Out of Memory
Press Set
Condition/Reason/Action
The user has exceeded the limit on the number of pages that can
be printed when using an authentication function.
Contact the administrator.
A firmware error has occurred.
Restart the printer. If the problem persists, contact Xerox
Technical Support.
A NVRAM error has occurred.
Restart the printer, and if the problem persists contact Xerox
Technical Support.
Paper is jammed inside the printer.
Press the button to open the front cover and remove the jammed
paper. See
Paper Jams
Paper is jammed inside the printer.
Press the button to open the front cover and remove the jammed
paper. See
Paper Jams
Paper is jammed inside the printer.
Press the button to open the front cover and remove the jammed
paper. Check the paper type. See
Paper is jammed inside Tray 2.
Remove the jammed paper. Open and close the front cover. See
Paper Jams
on page 10-2.
Paper is jammed inside Tray 3.
Remove the jammed paper. Open and close the front cover. See
Paper Jams
on page 10-2.
The printer memory is full and cannot continue processing the
current print job.
Press the OK button to clear the message, cancel the current print
job, and conduct the next print job, if any.
Press the Stop button to cancel the print job.
Press the Forward Arrow button to open the
Features
menu and delete the job being held.
if the problem has not been corrected, turn the printer off and then
on again.
To avoid this error in the future, do the following:
Delete unnecessary fonts, macros, and other data in printer
memory.
Install additional printer memory.
Phaser® 6180MFP Multifunction Printer
10-35
Control Panel Error Messages
on page 10-2.
on page 10-2.
Paper Jams
on page 10-2.
Walk-Up

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Phaser 6180mfp-nPhaser 6180mfp-d

Table of Contents