Xerox Phaser 6180MFP User Manual page 114

Selecting a Tray to Use for Copies
In some cases, you may want to make copies on letterhead, colored paper, or transparencies.
After loading the special paper in a tray, select the tray to use for your copies.
To select the tray for copying special paper:
1. On the control panel, press the Copy button.
2. Select
Paper Supply
3.
Select one of the following trays to use for the copies, and then press the OK button.
■
Tray 1 (MPT)
■
Tray 2
■ (if available on your printer)
Tray 3
Note: For best results, specify the size and type of paper if using Tray 1. Specify the paper
type if using Tray 2 or 3.
Selecting the Document Type
The scanner optimizes the appearance of the output based on the contents of the original. To
set the original type:
1. On the control panel, press the Copy button.
2. Select
Document Type
3. Select the original type, and then press the OK button.
: For black and white or colored text.
■ Text
■ : (factory default): For both text and photographs, such as magazines or
Mixed
newspapers.
■ : For photograph prints.
Photo
, and then press the OK button.
, and then press the OK button.
Phaser® 6180MFP Multifunction Printer
6-4
Adjusting Copying Options