Xerox Phaser 6180MFP User Manual page 172

PCL Settings
■ Paper Supply: Specifies the paper tray to be used for printing.
■ Auto (default): The tray is selected automatically when print data is sent.
Tray 1 (MPT)
■
■ Tray 2
■ Tray 3
■ Paper Size: Specifies the default paper size.
■ Orientation: The paper printing direction can be selected from Portrait and Landscape.
The default is Portrait.
■ 2 Sided Print: Specifies whether to perform 2-sided printing. The default is Off. Available
only if printer is equipped with a duplex unit
■ Binding Edge: Specifies the binding direction from Flip Long Edge or Flip Short Edge.
The default is Flip Long Edge. Available only if printer is equipped with a duplex unit
■ Font: Specifies the font used. The default is Courier.
■ Symbol Set: Specifies the font for symbols. The default is ROMAN-8.
■ Font Size: Specifies the default font size. Available only for typographic fonts.
■ Font Pitch: Specifies the character spacing. The default is 10.00. You can specify a value
between 6.00 and 24.00 in increments of 0.01.
■ Form Line: Specifies the form line (the number of lines per form). The default is 64. You
can specify a value between 5 and 128 in increments of 1.
■ Quantity: Specifies the copies to be printed. You can specify a value between 1 to 999.
The default is 1.
Image Enhance: Selects whether to perform image enhancement.
■
Image enhancement is a feature that makes the boundary line between black and white
smoother in order to decrease jags and enhance the visual appearance. The default is On.
■ Hex Dump: Specifies whether to print the data sent from a computer in the ASCII code
corresponding to the hexadecimal notation format in order to check the data contents. The
default is Disable.
■ Draft Mode: Specifies whether to print in draft mode. The default is Disable.
■ Line Termination: Specifies line termination.
■ Off: Line termination commands are not added.
■ Add-LF: The Line Feed command is added.
■ Add-CR: The Carriage Return command is added.
CR-XX: The Line Feed and Carriage Return commands are both added.
■
■ Default Color: Specifies the default color mode.
Phaser® 6180MFP Multifunction Printer
9-9
Description of Menu Items