Manual Color Registration Adjustment
You can fine tune color registration by performing a manual adjustment of color registration.
Printing the Color Registration Correction Chart
1.
Press the System button to display the
2.
Press the Up Arrow or Down Arrow button until
the OK button.
3.
Press the Up Arrow or Down Arrow button until
the OK button.
4.
Press the Up Arrow or Down Arrow button until
press the OK button.
5.
Press the Up Arrow or Down Arrow button until
press the OK button.
6.
Press the OK button again to print the Color Registration Correction Chart.
Determining Values
From the lines to the right of the Y (yellow), M (magenta), and C (cyan) pattern, find the
values of the straightest lines.
When "0" is the value nearest the straightest line, you do not need to adjust the color
registration. When the value is not "0", follow the procedure outlined in "Entering Values".
Note:
You can also use the densest colors of the grid to find the straightest lines. The colors
printed at the highest density are those next to the straightest lines.
Entering Values
Using the control panel, enter the values that you found in the Color Registration Correction
Chart to make adjustments.
1.
Press the System button to display the
2.
Press the Up Arrow or Down Arrow button until
the OK button.
3.
Press the Up Arrow or Down Arrow button until
the OK button.
4.
Press the Up Arrow or Down Arrow button until
press the OK button.
5.
Press the Up Arrow or Down Arrow button until
OK button.
6.
Select
,
Yellow
Magenta
7.
Press the Up Arrow or Down Arrow button until you reach the value displayed on the
chart.
8.
Press the OK button, and move the cursor to the next value.
screen.
Setup
screen.
Setup
, or
, and then press the OK button.
Cyan
Phaser® 6180MFP Multifunction Printer
10-26
appears, and then press
Admin Menu
appears, and then press
Maintenance
appears, and then
Adjust Color Regi
appears, and then
Color Regi Chart
appears, and then press
Admin Menu
appears, and then press
Maintenance
appears, and then
Adjust Color Regi
appears, and then press the
Color Regi
Print Quality