Image Adjustments - Xerox Phaser 6180MFP User Manual

Image Adjustments

You can change the following image adjustment settings:
■ Reducing or Enlarging the Image
■ Making the Image Lighter or Darker
■ Adjusting the Sharpness
■ Adjusting the Color Saturation
■ Setting Auto Exposure
■ Adjusting Color Balance
See also:
Selecting the Default Copy Settings
Reducing or Enlarging the Image
You can reduce the image to 25% of its original size or enlarge it to 400% of its original size.
To reduce or enlarge the image:
1.
On the control panel, press the Copy button.
2.
Select Reduce/Enlarge
3.
Select one of the following options:
■ Use the Up Arrow or Down Arrow to select a preset image size, and then press the
OK button.
■ Press the Back Arrow button, and then use the Back Arrow or Forward Arrow
buttons to set the copy size, and then press the OK button.
Note:
The factory default is 100%.
Making the Image Lighter or Darker
To lighten or darken an image when it is copied:
1. On the control panel, press the Copy button.
2. Select
Lighten/Darken
3. Press the Back Arrow or Forward Arrow button to lighten or darken the image, and then
press the OK button to confirm the setting.
on page 6-6
on page 6-6
on page 6-7
on page 6-7
on page 6-8
on page 6-8
on page 6-5
, and then press the OK button.
, and then press the OK button.
Phaser® 6180MFP Multifunction Printer
6-6
Adjusting Copying Options