Xerox Phaser 6180MFP User Manual page 211

9.
Repeat steps 6, 7, and 8 to continue adjusting the color registration.
10. Press the Exit button, and then select
11.
Press the OK button again.
The Color Registration Correction Chart is printed with the new values.
12. Color registration adjustment is complete when the straightest Y (yellow), M (magenta),
and C (cyan) lines are next to the "0" line.
If "0" is not next to the straightest lines, determine the values and adjust again.
Note: After printing the Color Registration Correction Chart, do not turn off the printer until
the printer motor has stopped running.
Enabling/Disabling Automatic Color Registration
Use the following procedure to enable/disable automatic color registration when a new print
cartridge is installed.
1. Press the System button to display the
2. Press the Up Arrow or Down Arrow button until
the OK button.
3. Press the Up Arrow or Down Arrow button until
the OK button.
4. Press the Up Arrow or Down Arrow button until
press the OK button.
5. Press the Up Arrow or Down Arrow button to turn automatic color registration
and then press the OK button.
Color Regi Chart
screen.
Setup
Phaser® 6180MFP Multifunction Printer
10-27
, and then press the OK button.
appears, and then press
Admin Menu
appears, and then press
Maintenance
appears, and then
Auto Regi Adjust
Print Quality
or ,
On Off