Xerox Phaser 6180MFP User Manual page 142

Setting the Original Size
To specify the size of the original:
1. Press the System button.
2.
Select
Default Settings
3. Select
Scan Defaults
4. Select
Document Size
5. Select a specific paper size to determine the area to be scanned, and then press the OK
button. The factory default setting is A4/Letter.
Setting the Scanned Image File Type
To specify the file type of the scanned image:
1. Press the System button.
2.
Select
Default Settings
3. Select
Scan Defaults
4.
Select File Format , and then press the OK button.
5. Select the type, and then press the OK button.
Available types:
■ (factory default)
PDF
■
MultiPageTIFF
■
TIFF
■
JPEG
Automatically Suppressing Background Variations
When you are using originals printed on thin paper, text or images printed on one side of the
paper can sometimes be seen on the other side of the paper. To prevent this from happening in
your scanned document, and to improve the quality for two-sided scanned pages, use the
setting on the control panel. This setting minimizes the sensitivity of the scanner to
Exposure
variations in the light background colors.
To turn on/off automatic suppression:
1.
Press the System button.
2. Select
Default Settings
3.
Select Scan Defaults
4. Select
Auto Exposure
5. Select either or
On Off
The factory default setting is On.
, and then press the OK button.
, and then press the OK button.
, and then press the OK button.
, and then press the OK button.
, and then press the OK button.
, and then press the OK button.
, and then press the OK button.
, and then press the OK button.
, and then press the OK button.
Phaser® 6180MFP Multifunction Printer
7-20
Adjusting Scanning Options
Auto