Xerox Phaser 6180MFP User Manual page 223

Multifunction printer
Hide thumbs Also See for Phaser 6180MFP:
Table of Contents

Advertisement

Message
Network Scan Error
Invalid Write
Permission
Error 016-784
Press OK
Network Scan Error
Server Out of Memory
Error 016-785
Press OK
Network Scan Error
Directory Not Found
Error 016-787
Press OK
Network Scan Error
File Name Exists
Error 016-788
Press OK
Network Scan Error
SMTP Connection
Failed
Press OK
Network Scan Error
Connection Timeout
Press OK
SMTP Server Error
Error 016-766
Press OK
Scan Error
Error 116-396
116-987
or
Restart Printer
Condition/Reason/Action
You do not have Write permission for the SMB/FTP server.
Modify your permissions on the server, or change the location you
are scanning to one that you have Write permission for.
The disk on the FTP/SMB server is full.
Make space on the server's disk.
The directory specified in the address book entry was not found.
Use CentreWare IS to correct the address book entry. For more
information, see
Using CentreWare IS to Create an Address
page 7-7.
The location you are scanning to has a file with the same name.
Specify a different name, and then resend.
Can not connect to the SMTP server.
Check that the printer is physically connected to the network.
Use CentreWare IS to verify that the
correct. For more information see
page 7-11.
Can not connect to the SMB/FTP server.
Check that the printer is physically connected to the network.
An error occurred on the SMTP server.
Attempt the operation again. Consult your system administrator if
the operation fails again.
A fatal error occurred.
Restart the printer. If the error occurs again, contact Xerox
Technical Support.
Phaser® 6180MFP Multifunction Printer
10-39
Control Panel Error Messages
Email Server
settings are
Setting Up the SMTP Server
on
on

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Phaser 6180mfp-nPhaser 6180mfp-d

Table of Contents