Basic Faxing; Sending A Fax From The Printer - Xerox Phaser 6180MFP User Manual

Basic Faxing

This section includes:
■

Sending a Fax from the Printer

Sending a Fax from Your Computer
■
Note: Before faxing you must set the country code and fax number for the printer. See
Setup on page 8-2.
Sending a Fax from the Printer
To quickly send a fax from the printer to a single recipient using factory defaults:
1. Select one of the following methods:
■ Document Glass: Place the document you are faxing facedown on the document
glass with the top of the page toward the left side of the printer. When faxing from the
document glass, the printer scans the document and then sends the fax. Use the
document feeder when faxing a multiple page document.
■ Document Feeder: Remove any staples and paper clips from pages and insert them
faceup in the document feeder with the top of the page entering the document feeder
first. For information on paper that can be used with the automatic document feeder,
see Automatic Document Feeder Guidelines
2. On the control panel, press the Fax button.
3.
Using the alphanumeric keypad, enter the fax telephone number, and then press the
Start button.
If you use the document feeder, the printer scans the pages and transmits the fax. If you
use the document glass, the printer scans the page, and then transmits the fax.
Note:
To print a confirmation page displaying the fax transmission status, turn on the
transmission report option.
See also:
Using the Address Book When Faxing
Managing Fax Functions
Printing Transmission Reports
Inserting Pauses in Fax Numbers
on page 8-4
on page 8-5
on page 8-6
on page 8-14
on page 8-14
on page 8-17
Phaser® 6180MFP Multifunction Printer
8-4
on page 5-4.
Basic Faxing
Fax