Print Quality; Print-Quality Problems - Xerox Phaser 6180MFP User Manual

Print Quality

This section includes:
■

Print-Quality Problems

■ Copy-Quality Problems
Color Registration on page 10-25
■
Print-Quality Problems
When the print quality is poor, select the closest symptom from the following table to correct
the problem.
If the print quality does not improve after carrying out the appropriate action, contact Xerox
Customer Support or your reseller.
Symptom
Faded printouts
on page 10-20
on page 10-24
Reason/Action
Multiple colors faded:
The print cartridges are not Xerox print cartridges.
■
Verify that the print cartridges (C/M/Y/K) are genuine Xerox cartridges,
and replace if necessary.
The paper is outside the recommended specification range.
■
Replace the media with a recommend size and type, and confirm that
your control panel settings are correct. See
The paper is damp.
■
Replace the paper. See
The transfer unit is old or damaged.
■
Replace the transfer unit.
The high-voltage supply is defective.
■
For assistance, go to the Xerox Support website:
www.xerox.com/office/6180MFPsupport.
Only one color faded:
Check the condition of the print cartridge, and replace as necessary.
Phaser® 6180MFP Multifunction Printer
10-20
About Paper
About Paper on page 5-6.
Print Quality
on page 5-6.