HP 4277A Operation And Service Manual page 70

SECTION III
Model 427 7 A
NUMBER OF DISPLAY DIGITS FOR ESR AND G
IN C-ESR/G MEASUREMENT
Note: 1) ESR and G ranges depend on the selected C range.
2) Numbers not enclosed in parentheses apply when Test Signal Level is HIGH;
numbers enclosed in parentheses apply when Test Signal Level is LOW.
Note: 1) ESR and G ranges depend on the selected L range.
2) Numbers not enclosed in parentheses apply when Test Signal Level is HIGH;
numbers enclosed in parentheses apply when Test Signal Level is LOW.
Figure 3-4. Measurement Ranges and Number of Display Digits (Sheet 12 of 16).
3-28