Table of Contents

Advertisement

Quick Links

Errata
This manual may contain references to HP or Hewlett-Packard. Please note that Hewlett-Packard's former test
and measurement, semiconductor products and chemical analysis businesses are now part of Agilent
Technologies. To reduce potential confusion, the only change to product numbers and names has been in the
company name prefix: where a product number/name was HP XXXX the current name/number is now Agilent
XXXX. For example, model number HP8648 is now model number Agilent 8648.
Ce manuel peut contenir des références à <<HP>> ou <<Hewlett-Packard.>> Veuillez noter que les produits de
test et mesure, de semi-conducteur et d'analyse chimique qui avaient fait partie de la société Hewlett-Packard
sont maintenent une partie de la société Agilent Technologies. Pour reduire la confusion potentielle, le seul
changement aux noms de reference a été dans le préfixe de nom de société : là où un nom de référence était HP
XXXX, le nouveau nom de référence est maintenant Agilent XXXX. Par example, le HP 8648 s'appelle
maintenent Agilent 8648.
Diese Gebrauchsanweiseung kann Bezug nehmen auf die Namen HP oder Hewlett-Packard. Bitte beachten Sie,
dass ehemalige Betriebsbereiche von Hewlett-Packard wie HP-Halbleiterprodukte, HP-chemische Analysen
oder HP-Test- und Messwesen nun zu der Firma Agilent Technology gehören. Um Verwirrung zu vermeiden
wurde lediglich bei Produktname und - Nummer der vo laufende Firmenname geändert: Produkte mit dem
Namen/Nummer HP XXXX lauten nun mehr Agilent XXXX. Z.B, das Modell HP 8648 heißt nun Agilent 8648.
Questo manuale potrebbe contenere riferimenti ad HP o Hewlett-Packard. Si noti che le attività precedentemente
gestite da Hewlett-Packard nel campo di Test & Misura, Semiconduttori, ed Analisi Chimica sono ora diventate
parte di Agilent Technologies. Al fine di ridurre il rischio di confusione, l'unica modifica effettuata sui numeri di
prodotto e sui nomi ha riguardato il prefisso con il nome dell'azienda : dove precedentemente compariva "HP
XXXX" compare ora "Agilent XXXX". Ad esempio: il modello HP8648 è ora indicato come Agilent 8648.
Este manual puede hacer referencias a HP o Hewlett Packard. Las organizaciones de Prueba y Medición (Test
and Measurement), Semiconductores (Semiconductor Products) y Análisis Químico (Chemical Analysis) que
pertenecían a Hewlett Packard, ahora forman parte de Agilent Technologies. Para reducir una potencial
confusión, el único cambio en el número de producto y nombre, es el prefijo de la compañía: Si el producto solía
ser HP XXXX, ahora pasa a ser Agilent XXXX. Por ejemplo, el modelo HP8648 es ahora Agilent 8648.
Document Part Number 5971-2668
Printed in Malaysia September 2004
A

Advertisement

Table of Contents
loading

Summary of Contents for HP 432A

  • Page 1 Agilent Technologies. Pour reduire la confusion potentielle, le seul changement aux noms de reference a été dans le préfixe de nom de société : là où un nom de référence était HP XXXX, le nouveau nom de référence est maintenant Agilent XXXX. Par example, le HP 8648 s'appelle maintenent Agilent 8648.
  • Page 3: Table Of Contents

    1-1. Description ..... 1-1 5-14. 432A Performance Tests with 1-5. Instrument Identification..1-1 8477A Calibrator .
  • Page 4 Model 432A Block Diagram ... . . 4–3 7–10. Model 432A Switches ....7–12 4–3.
  • Page 5: Declaration Of Conformity

    Regulatory Information Model 432A Declaration of Conformity according to ISO/IEC Guide 22 and EN45014 Manufacturer’s Name: Hewlett-Packard Ltd. Manufacturer’s Address: Queensferry Microwave Division South Queensferry West Lothian, EH30 9TG Scotland, United Kingdom Declares that the product Product Name: Thermistor Power Meter...
  • Page 6: Adjustments

    For warranty service or repair, this product must be returned to a service facility designated by HP. Buyer shall prepay shipping charges to HP and HP shall pay shipping charges to return the product to Buyer. However, Buyer shall pay all shipping charges, duties, and taxes for products returned to HP from another country.
  • Page 7 Regulatory Information Model 432A Certification Hewlett-Packard Company certifies that this product met its published specifications at the time of shipment from the factory. Hewlett-Packard further certifies that its calibration measurements are traceable to the United States National Bureau of Standards, to the extent allowed by the Bureau's calibration facility, and to the calibration facilities of other International Standards Organization members.
  • Page 8: Adjustment

    Model 432A Regulatory Information General Safety The following general safety precautions must be observed during all phases of operation, service, and repair of this instrument. Failure to comply with these precautions or with specific warnings elsewhere in this manual violates safety standards of design, manufacture, and intended use of the instrument.
  • Page 9: Safety Symbols

    Regulatory Information Model 432A Safety Symbols The following symbols on the instrument and in the manual indicate precautions which must be taken to maintain safe operation of the instrument. Safety Symbols The Instruction Documentation Symbol. The product is marked with this symbol when it is necessary for the user to refer to the instructions in the supplied documen- tation.
  • Page 10 Model 432A Regulatory Information Noise Declaration LpA<70dB am Arbeitsplatz (operator position) normaler Betrieb (normal position) nach DIN 45635 pt.19 (per ISO 7779)
  • Page 12: Description

    Appendix in the Manual. If the change information is missing, mount used for a given measurement. For portable contact your HP Sales Office (Sales Offices are listed at the back operation, Option 01 instruments have a rechargeable of the Manual).
  • Page 14: Operating Environment

    NOTE If the HP 432A is subject to HP Class B WARNING For continued protection against fire condensation it is recommended that the hazard, replace the line fuse only with...
  • Page 16: Ii Installation

    By 2–3. If damage to the shipping carton is evident, ask that connecting the 432A to an ac source, the battery may be the carrier’s agent be present when the instrument is charged overnight. The battery can be maintained in the unpacked.
  • Page 22: Iii Operating Information

    Model 432A Section III Operating Information POWER. Instrument power ON/OFF switch; Mechanical Meter Zero. Sets meter suspension connects either ac line voltage or internal so that meter indicates zero. To adjust the zero: battery (Option 01 only) to internal voltage regulator circuits.
  • Page 24 Used calibrating power meter with HP 8477A Power Meter Calibrator. Also used Power Cord Input. Use power cord provided, for precision power measurements. HP 8120-0078. Line power limits are 115/230 Vac, 48-440 Hz. Check FUSE rating and position of line voltage slide switch before Input.
  • Page 26: Battery Operation

    Apply RF power to the thermistor mount. Power Turn the 432A POWER switch ON. For battery is indicated on the meter directly in mW or dBm. operation, the AC LINE indicator does not turn NOTE: The photograph opposite is for illustration purposes only.
  • Page 74: Ordering Information

    Model 432A- 101 was obsolete in November 2005 due to parts depletion. Replacement product for Model 432A- 100 The Model 432A- 100 has been replaced with Model 432- 101 as this product supports 100 VAC line voltage input. Ordering Information Customers should place order for Model 432A- 101 instead of Model 432A- 100.
  • Page 78 POST-SALES / SUPPORT ADDRESS LIST If you need technical assistance with a Hewlett-Packard test and measurement product or application please contact the Hewlett-Packard office or distributor in your country. Asia Pacific: Canada: Portugal: (11) 482 85 00 Hewlett-Packard Canada Ltd. Hong Kong: 5150 Spectrum Way (852) 2599 7889...

Table of Contents