Xerox 6030 User Manual page 85

XEROX WIDE FORMAT COPY SYSTEM
FINISHE R OPTION
IS NOT AVAILABLE
Finisher Not Available Error Message Screen
When a set is being built, the finisher options cannot be changed and
pressing the Finisher key is invalid. The error screen shown below is
displayed. Enable the finisher and select the finisher options either
before selecting the Sets Build option or after the set has been built.
FINIS HER OP TION CANNOT BE CHA NGED
DURING SETS B UILD OPERA TION
1. Press the Exit key to return to the READY screen. The Finisher
indicator lamp is extinguished.
2. Press the Previous or Next key to scroll through the list of
options.
3. When the desired option is highlighted, press the Enter key to
select the option. The screen for the selected option is
displayed. See Finisher menu options below and on the next
page for an illustration and description of each option. Also refer
to the Folder User Documentation for additional information on
the available folding options.
4. Press the Previous or Next key to scroll through the choices for
the selected option.
5. When the desired choice is highlighted, press the Enter key to
confirm your selection.
6. Repeat steps 4 and 5 if you want to change a setting for any
other options.
7. Press the Exit key to return to the READY screen.
A page icon is displayed with a dotted box at one of the page corners if a
FOLD PROGRAM other than BYPASS is selected. The dotted box
indicates the title block location selection made using the Finisher menu.
The title block location can be changed on this screen using the Next
and Previous keys.
FINISHE R
FINISHE R
Special features keys • 71