Diagnostics Menu - Xerox 6030 User Manual

XEROX WIDE FORMAT COPY SYSTEM
SECURITY SE TTINGS
IMAGE RECALL:
5. Press the Previous or Next key to highlight the desired
response, ENABLED or DISABLED.
6. Press the Enter key to confirm your selection.
7. Press the Exit key to return to the SYSTEM ADMINISTRATION
menu screen.

Diagnostics menu

The DIAGNOSTICS option of the Main Menu contains the following
menu choices:
NOTE: Some of the scanner diagnostics listed below require a
password to access and are performed only by a Customer Service
Engineer.
•
USAGE METERS - Enables you to view usage information for
documents scanned and media printed.
•
CLEAR USAGE - Enables the Customer Service Engineer to
reset to zero the usage value for documents scanned. The
diagnostic password is required for this function.
•
SCANNER DIAGNOSTICS - Provides a sub-menu of Scan
System diagnostic routines. Some of these routines are
accessible by both the operator and the Customer Service
Engineer, but should only be accessed by an operator when
directed to do so by Service. Access to these tests has been
given to enable some preliminary diagnostics to be done by
phone before a Customer Service Engineer is dispatched.
Others are accessible by the Service Engineer only and require
the entry of the diagnostic password.
•
INSTALLATION TEST PRINT - Enables the Customer Service
Engineer to make a copy of the test print to assist in diagnosing
the Scan System.
•
PASSWORD - Enables the Customer Service Engineer to enter
the password for access to password-protected diagnostic
functions.
To access the DIAGNOSTICS menu:
1. Press the Menu key. The MAIN MENU screen is displayed.
ENABLED
Security Settings Screen
Main Menu • 121