Xerox 6030 User Manual page 164

Problem
Visible document edges on
the copy.
Dark spots or smudges
appear on the copy.
The copy image is too light.
The image density on the
copy varies from light to dark.
Copies made in Photo mode
have geometric patterns.
Fine lines on the original do
not appear on the copy when
the image size is reduced.
Gray areas appear in the copy
at the location of creases or
folds in the original document.
Error messages
An error message is displayed
on the Scan System Control
Panel.
Error message
40000001: ERROR
ACCOUNTING DISK FULL
40000002: ERROR
CONTROLLER FAULT -
50000001
CONTROLLER FAULT -
50000002
150 • Problem solving
First solution to try
Try a lighter Contrast setting.
Clean the Platen Glass.
Adjust the Copy setting for
best image quality.
Rotate the original 90
degrees.
Set the Original, Type to
Normal and the Background
Suppression to Off.
Enable the LINE MODE LINE
PRESERVATION option. See
"Imaging" in the "Main Menu"
section for more information.
Refold the document in the
reverse direction to flatten the
creases or folds.
Locate the message in Table
8, "Error Code Messages," in
this section and perform the
corrective action indicated.
Table 8. Error Code Messages Table
Probable cause
The Job Log File size has reached the
maximum space allocated for it.
The number of Job Records in the Job
Log File has reached the maximum as
defined by the FreeFlow Accxes
Account Management Tool.
The Controller has developed a
"memory is full" internal fault. Large
documents using Auto
Reduction/Enlargement or Auto-
Rotate may cause this fault. Also,
Photo and Mixed/Custom modes
require significantly more memory
than Line mode.
The Controller has developed a
"memory is full" internal fault. Large
documents using Auto
Reduction/Enlargement or Auto
Rotate may cause this fault. Also,
Photo and Mixed/Custom modes
require significantly more memory
than Line mode.
Second solution to try
Inspect the original and
clean it if necessary.
Rotate the original 90
degrees.
Adjust the Copy setting for
best image quality.
Set Original, Type to Line
and Background
Suppression off.
Adjust the Copy setting for
best image quality.
Corrective action
Contact your System Administrator.
Contact your System Administrator.
Remove the document. Press Start to
print the job.
Remove the document. Wait for previous
scans to finish printing. End the current set
or print it if a set is in progress. Rescan the
document.
XEROX WIDE FORMAT COPY SYSTEM
Third solution to
try
Adjust the Copy
setting for best
image quality.
Try a lighter
Contrast setting.