Recall Factory Defaults; Finisher Key - Xerox 6030 User Manual

Recall Factory
Defaults
70 • Special features keys
The factory default job settings are permanently stored in memory. The
RECALL FACTORY DEFAULTS option of the STORE/RECALL menu
enables you to recall the factory default settings as the active default
settings.
To recall the factory default settings:
1. Press the Store/Recall key. The STORE/RECALL menu screen
is displayed.
2. Press the Next key until RECALL FACTORY DEFAULTS is
highlighted.
3. Press the Enter key to select RECALL FACTORY DEFAULTS.
The factory default settings are immediately recalled. A
confirmation screen is displayed.
JOB PARAMETERS RECALLED
PRESS ENTER TO CONTINUE
Job Parameters Recalled Screen
4. Press the Enter key to return to the READY screen.

Finisher key

A finishing device, such as a folder, can be connected to the WIDE
FORMAT COPY SYSTEM. If such a device is connected, the Finisher
key enables or disables that device.
To enable/disable a finishing device:
•
Press the Finisher key. The Finisher indicator lamp illuminates
and the FINISHER menu screen is displayed. The black arrows
indicate that the menu contains more options than are visible.
The selected option is highlighted.
FOLD PROGRAM
TITLE BLOCK LOCATION
OUTPUT BIN
OVERLENGTH OPTION
TAB OPTIONS
Other Finisher options that are accessed from this screen, using the
Next key, are: Punch Options, Margin Options, Crossfold Options, and
Intelligent Title Block Option.
NOTE: If no finishing device is connected, pressing the Finisher key
produces the error message shown below.
FINISHER
Finisher Screen
XEROX WIDE FORMAT COPY SYSTEM