Recent Fault List - Xerox 6030 User Manual

RECENT FAULT LIST

XEROX WIDE FORMAT COPY SYSTEM
MODEL: 1
FIRMWARE : 1.1.0
MODEL: XEROX XXXX WIDE FORMAT
FIRMWARE: XXX
NOTE: The XXXX represents the Printer name.
MODEL:
NONE
NOTE: This screen identifies the Finisher, if any. If there is no finisher,
the MODEL is displayed as NONE. If a Folder is connected, the
FINISHER screen displays the configuration of the connected Folder.
7. Press the Exit key to return to the SYSTEM DESCRIPTION
screen.
The RECENT FAULT LIST option of the SYSTEM INFORMATION menu
displays the most recent faults related to the Scan System. Fault
messages are stored in the Controller. Each fault message contains a
fault code and a digital time stamp. When you call for service, the
service center may ask you for this information.
To display the recent fault list:
1. Press the Menu key. The MAIN MENU screen is displayed.
2. Press the Next key to highlight SYSTEM INFORMATION.
3. Press the Enter key to select SYSTEM INFORMATION. The
SYSTEM INFORMATION menu screen is displayed.
CONTROL PANEL
Control Panel Screen
PRINTER
Printer Screen
FINISHER
Finisher Screen
Main Menu • 111