Xerox 6030 User Manual page 150

READ NVR
136 • Main Menu
12. Press the Previous or Next key to highlight the desired function.
The choices are GO TO WIDTH, GO TO CALIBRATE, GO TO
HOME, FIND HOME, and ROTATE.
13. Press the Enter key to confirm your selection.
14. Press the Previous or Next key to highlight MOTOR.
15. Press the Enter key to confirm your selection.
16. Press the Previous or Next key to highlight ON. The choices
are ON and OFF. The requested operation will execute.
If a GO TO or FIND function has been selected, the MOTOR field will be
automatically set to OFF when the MOTOR field is once again selected.
If the ROTATE function has been selected, the motor will run
continuously until you set the MOTOR field to OFF.
NOTE: If the Scan System encounters a failure accessing the calibration
motor function, the fourth line of the display will read "FAILURE CODE:"
followed by a two-digit hexadecimal number. The fourth line may also
display NO RESPONSE FROM SCANNER if the Scan System does not
respond to the test request.
17. Press the Exit key to return to the Component Tests menu
screen.
The READ NVR option allows the examination of the contents of the
non-volatile RAM (NVR). The service center may ask you to provide this
information when calling for service.
To run the READ NVR diagnostic:
1. Press the Menu key. The MAIN MENU screen is displayed.
2. Press the Next key until DIAGNOSTICS is highlighted.
3. Press the Enter key to select DIAGNOSTICS. The
DIAGNOSTICS menu screen is displayed.
4. Press the Next key until SCANNER DIAGNOSTICS is displayed.
5. Press the Enter key to select SCANNER DIAGNOSTICS. The
SCANNER DIAGNOSTICS menu screen is displayed.
6. Press the Next key until READ NVR is highlighted.
7. Press the Enter key to select READ NVR. The READ NVR
screen is displayed. An "xx" displays for all the NVR values.
00 -07: xx xx xx xx xx xx xx xx
xx xx xx xx xx xx xx xx
08 - 0F:
xx xx xx xx xx xx xx xx
10-17:
xx xx xx xx xx xx xx xx
18-1F:
PRESS START TO BEGIN
8. Press the Start key to display the actual values.
9. Press the Previous or Next key to scroll through the values.
There are 16 rows of values in all.
READ NVR
Read NVR Screen
XEROX WIDE FORMAT COPY SYSTEM