2.2
Windows Driver Settings
This section explains how to set up the Windows Driver parameters using DocuWide
6050/6030 on Windows XP as an example.
Displaying the Windows Driver Setup Screen
The following two methods are available for displaying the Windows Driver setup
screen.
•
From the application software. This method is used to temporarily change the printing
conditions.
•
From the [Start] menu. This method is used to change the default printing settings and
the default settings for Windows Driver.
Displaying the Windows Driver Setup Screen from the Application Software
Refer to Steps
Driver setup screen from the application software.
Displaying the Windows Driver Setup Screen from the [Start] Menu
1
Click [Start] on the task bar, then select [Control Panel] > [Printers and Other
Hardware] > [Printers and Faxes].
The [Printers and Faxes] appears.
48
Chapter 2 Printing Setup
1
4
to
in "2.1 Printing" (page. 46) for details on displaying the Windows
Log into the system as a user belonging to the Administrator group or as an
administrator when using Windows 2000 and Windows XP.
Click [Start] on the task bar, then select [Settings] > [Printers] with Windows
98, Me, and 2000.