Xerox Wide Format 6030 Software Manual page 61

Synchronized Cut
Selects the method of specifying the length of long print paper.
There are cases where the image at the bottom of the paper will be lost if the data
exceeds the possible printing area of the printer. Set up a bottom margin on the
printer if the data exceeds the possible printing area.
•
[Auto Length]
Automatically sets the length of long print paper in accordance with the paper size.
•
[Custom Length]
Enables the length of long print paper to be entered.
Output Orientation
Selects the orientation in which the paper is to be output.
The roll paper to be used for printing is selected automatically when this parameter is
set.
•
The orientation of the output is automatically set in accordance with the [Output Paper
Size] setting when [Auto] is selected.
•
Select [Portrait] or [Landscape] if the orientation of the paper is to be changed when
using a folder or other equipment.
Image Orientation
Selects the orientation of the image specified with the application.
Multi-up
Pastes and prints two or four pages of a document onto a single sheet of paper specified
with [Output Size]. This function is known as [Multi-up], assigning two document pages
to one sheet of paper is known as [2 up], and assigning four document pages to one sheet
of paper is known as [4 up].
•
The [Media Orientation] menu appears when [4 up] has been selected. This enables the
sequence in which the pages are to be laid out on the paper to be specified as [Portrait]
or [Landscape].
Rotate Image 180 degrees
Rotates the image 180 degrees and then prints it.
Preview
Enables the image size to be checked before printing. Check the [Displays output
preview] check box and click [OK] to display the [Output preview] window. To print the
image after checking its size, click the
2 up
(Print) button.
2.2 Windows Driver Settings 53