Xerox Wide Format 6030 Software Manual page 68

Convert all colors into Black
Prints all characters, drawings, tables and graphs that are not black or white as black
when a color image is to be printed in monotone. This prevents fine colored lines from
being difficult to see.
Contrast
Adjusts the contrast of photographs.
[Contrast] indicates the level of change in all tones between white and black. The higher
the contrast, the brighter the tone change.
•
The contrast is adjusted within a range of –100 to 100 in single increments through key
entry or with the slide bar.
•
The results of changes can be checked on the graphic image on the left-hand side.
60 Chapter 2 Printing Setup
All areas that have been filled in with the dither process will also be converted to
black.